32968-N11CA-A200-250 FAG Tapered Roller bearing

r3,4 min.:0.3 mm; Da max.:30.8 mm; d2 ≈:18.82 mm; a:16 mm; da min.:19.2 mm; Calculation factor Y2:1.41; Reference speed:26000 r/min; Calculation factor X:0.41; d:15 mm; Calculation factor Y0:0.38;

D:180 mm; B:38 mm; Dynamic (Ca):254 kN; C:29 mm; r2s (min):0.6 mm; r1s (min):2 mm; d2:120 mm; Static (Coa):430 kN; Pu:54.120 kN; a:40 mm;

Ca:95.809 mm; Initial grease fill:1304.1 g; Housing:SAF 536; da:165.1 mm; P90°:140 kN; Bearing limiting speed:2600 r/min; Stabilizing ring:SR-36-30; Appropriate attachment bolt size G:1 in; R1:114.3 mm; Bearing:22236 CCK/W33;

D:150.0000 mm; B:28.00 mm; Grease Speed Rating n1:10000 rpm; Oil Speed Rating n2:14000 rpm; Fillet Radius rb:1.00 mm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:93000 N; Basic Dynamic Radial Load Rating C:104000 N; d:85.000 mm;

Recommended diameter for attachment bolts, inch G:0.375 in; B1:43.7 mm; A1:11 mm; Fatigue load limit Pu:0.28 kN; d:20 mm; A5:18.5 mm; A3:3.2 mm; J7:11.5 mm; End cover:ECY 204; Da:50.8 mm;

Calculation factor Y:0.4; Reference speed:3200 r/min; Limiting speed:4000 r/min; Calculation factor e:0.3; das:73.4 mm; Basic static load rating C0:88 kN; Basic dynamic load rating C:58.3 kN; B:16 mm; r1,2 min.:1 mm; ra max.:1 mm;

Cap bolt recommended tightening torque:298.3 N·m; R2:21.431 mm; da:66.675 mm; J min.:244.475 mm; Stabilizing ring:SR-16-13; H1:88.9 mm; Da:140 mm; A1:88.9 mm; Cap bolt, SAE grade:8; Labyrinth ring:2 x LOR 43;

D:180 mm; B:38 mm; Dynamic (Ca):254 kN; C:29 mm; r2s (min):0.6 mm; r1s (min):2 mm; d2:120 mm; Static (Coa):430 kN; Pu:54.120 kN; a:40 mm;

G1:28 mm; G2:G 1/4; d:380 mm; A:9 mm; B1:208 mm; B2:228 mm; d1:360 mm; G:Tr 400x5; Nut for removal:HM 3180; Mass withdrawal sleeve:23.5 kg;

D:180 mm; B:38 mm; Dynamic (Ca):254 kN; C:29 mm; r2s (min):0.6 mm; r1s (min):2 mm; d2:120 mm; Static (Coa):430 kN; Pu:54.120 kN; a:40 mm;

B:42.90 mm; Oil Speed Rating n2:6000 rpm; D:100.0000 mm; Basic Static Radial Load Rating Co:53000 N; Accessories:No Shield, no Seal,; Sealed Speed Rating n3:4500 rpm; d:45.000 mm; Basic Dynamic Radial Load Rating C:72800 N; Fillet Radius ra:1.50 mm; Grease Speed Rating n1:4500 rpm;

G1:28 mm; G2:G 1/4; d:380 mm; A:9 mm; B1:208 mm; B2:228 mm; d1:360 mm; G:Tr 400x5; Nut for removal:HM 3180; Mass withdrawal sleeve:23.5 kg;

Sealed Speed Rating n3:1600 rpm; d:160.000 mm; Basic Dynamic Radial Load Rating C:143000 N; Accessories:Two Seals & Snap-Rin; Fillet Radius ra:2.00 mm; Oil Speed Rating Open/Shielded n2:3000 rpm; Basic Static Radial Load Rating Co:143000 N; B:38.00 mm; D:240.0000 mm; Grease Speed Rating Open/Shielded n1:2400 rpm;

B:42.90 mm; Oil Speed Rating n2:6000 rpm; D:100.0000 mm; Basic Static Radial Load Rating Co:53000 N; Accessories:No Shield, no Seal,; Sealed Speed Rating n3:4500 rpm; d:45.000 mm; Basic Dynamic Radial Load Rating C:72800 N; Fillet Radius ra:1.50 mm; Grease Speed Rating n1:4500 rpm;

D:150.0000 mm; B:28.00 mm; Grease Speed Rating n1:10000 rpm; Oil Speed Rating n2:14000 rpm; Fillet Radius rb:1.00 mm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:93000 N; Basic Dynamic Radial Load Rating C:104000 N; d:85.000 mm;