NCF29/600V NK Cylindrical roller bearing

D1 ≈:1053.6 mm; Mass bearing:3480 kg; F:885 mm; d:759 mm; C:740 mm; K:12 mm; b:22.3 mm; Basic static load rating C0:85000 kN; D:1210 mm; Design variant/feature:BC4.10/W33WI;

da max.:111.2 mm; b1:11.5 mm; M:5 mm; Specific static load factor K0:500 N/mm²; Da min.:141.5 mm; Mass plain bearing:6.8 kg; d:100 mm; Design (sliding contact surface combination):Steel/steel; Sealing solution:Triple-lip seals; Basic dynamic load rating C:655 kN;

Taconite seal:TER 153; Mass pillow block:172 kg; Bearing:23238 CCK/W33; P150°:94.3 kN; P120°:107 kN; Adapter sleeve assembly:SNW 138x6.13/16; Stabilizing ring:SR-38-32; Cap bolt, SAE grade:5; A1:190.5 mm; Eye bolt:2 x 3/8-16 UNC;

D1 ≈:1053.6 mm; Mass bearing:3480 kg; F:885 mm; d:759 mm; C:740 mm; K:12 mm; b:22.3 mm; Basic static load rating C0:85000 kN; D:1210 mm; Design variant/feature:BC4.10/W33WI;

A1:111.125 mm; A2:152.797 mm; Appropriate attachment bolt size G:0.875 in; P60°:136 kN; RG:3/8 NPT; J max.:333.375 mm; Initial grease fill:365.71 g; J min.:295.275 mm; R2:30.163 mm; PG:1/4 NPT;

D:225 mm; Oil:3 500 min-1; rs:3 mm; Static (Cor):153.000 kN; ra:2.5 max; Bearing designation:6321  ; Grease:3 000 min-1; B:49 mm; d:105 mm; Da:211 max;

da max.:125 mm; Mass bearing + sleeve:5.75 kg; Calculation factor e:0.23; Limiting speed:4300 r/min; Fatigue load limit Pu:46.5 kN; d3:145 mm; d1:100 mm; Calculation factor Y0:2.8; Basic static load rating C0:440 kN; B:45 mm;

Grease:1330 kN; d:220 mm; B:60 mm; Static (Cor):8.3 mm; Oil:121.770 kN; D:300 mm; Pu:680 kN; rs (min):2.1 mm; with cylindrical bore:1 500 min-1; with tapered bore:1 900 min-1;

A1:111.125 mm; A2:152.797 mm; Appropriate attachment bolt size G:0.875 in; P60°:136 kN; RG:3/8 NPT; J max.:333.375 mm; Initial grease fill:365.71 g; J min.:295.275 mm; R2:30.163 mm; PG:1/4 NPT;

Da:180 mm; da:85.725 mm; L:387.35 mm; ba:44.45 mm; PG:1/4 NPT; Housing:SSAFS 520; P90°:84.5 kN; R1:58.737 mm; End plug (suffix Y):EPR 12; Cap bolt, SAE grade:8;

RG:3/8 NPT; Mass pillow block:29.9 kg; P120°:32 kN; Cap bolt recommended tightening torque:515.2 N·m; Cap bolt:2 x 3/4-10 UNC; N1:22.225 mm; P150°:28.9 kN; S:4.763 mm; Stabilizing ring:SR-19-16; Bearing:22316 EK;

Grease:1330 kN; d:220 mm; B:60 mm; Static (Cor):8.3 mm; Oil:121.770 kN; D:300 mm; Pu:680 kN; rs (min):2.1 mm; with cylindrical bore:1 500 min-1; with tapered bore:1 900 min-1;

da max.:111.2 mm; b1:11.5 mm; M:5 mm; Specific static load factor K0:500 N/mm²; Da min.:141.5 mm; Mass plain bearing:6.8 kg; d:100 mm; Design (sliding contact surface combination):Steel/steel; Sealing solution:Triple-lip seals; Basic dynamic load rating C:655 kN;

D:225 mm; Oil:3 500 min-1; rs:3 mm; Static (Cor):153.000 kN; ra:2.5 max; Bearing designation:6321  ; Grease:3 000 min-1; B:49 mm; d:105 mm; Da:211 max;