T169W Timken Thrut Roller bearing

d:105.000 mm; Grease Speed Rating n1:1800 rpm; Sealed Speed Rating n3:1800 rpm; Basic Dynamic Radial Load Rating C:186000 N; Oil Speed Rating n2:2800 rpm; Accessories:No Shield, no Seal; D:190.0000 mm; B:65.10 mm; Basic Static Radial Load Rating Co:180000 N; Fillet Radius ra:2.00 mm;

Basic Static Radial Load Rating Co:160000 N; Basic Dynamic Radial Load Rating C:157000 N; Grease Speed Rating Open/Shielded n1:2800 rpm; B:43.00 mm; D:190.0000 mm; d:90.000 mm; Oil Speed Rating Open/Shielded n2:3400 rpm; Fillet Radius ra:2.50 mm; Accessories:Snap-Ring;

Tolerance housing:H7; B:20 mm; D:22 mm; Specific static load factor K0:20 N/mm²; d:15 mm; Permissible sliding velocity v max.:5 m/s; Coefficient of friction µ min.:0.05; Mass bushing:0.026 kg; Specific dynamic load factor K:10 N/mm²; Coefficient of friction µ max.:0.1;

Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:78100 N; D:110.0000 mm; Sealed Speed Rating n3:3800 rpm; Oil Speed Rating n2:5000 rpm; d:60.000 mm; Basic Static Radial Load Rating Co:88000 N; Grease Speed Rating n1:3800 rpm; B:36.50 mm; Accessories:No Shield, no Seal,;

Da max.:98 mm; r1,2 min.:1.5 mm; ra max.:1.5 mm; Reference speed:1000 r/min; Mass bearing:3.63 kg; Minimum axial load factor A:0.108; Fatigue load limit Pu:114 kN; d:90 mm; Basic dynamic load rating C:265 kN; Limiting speed:2000 r/min;

Bearing designation:16005  ; Grease:14 000 min-1; rs:0.3 mm; Static (Cor):4.550 kN; Dynamic (Cr):6.950 kN; ra:0.3 max; d:25 mm; da:27 min; Pu:0.207 kN; Oil:17 000 min-1;

Accessories:Two Shields; d:9.500 mm; Grease Speed Rating Open/Shielded n1:31000 rpm; Shielded or Sealed B1:7.1 mm; Sealed Speed Rating n3:21000 rpm; Basic Static Radial Load Rating Co:1340 N; Fillet Radius ra:0.41 mm; D:22.2000 mm; Basic Dynamic Radial Load Rating C:3320 N; Width Plain B:5.6 mm;

Housing:SAF 044 KA; Appropriate attachment bolt size G:1.25 in; Mass pillow block:153 kg; H:401.637 mm; ba:80.169 mm; Max. speed for Taconite seal:385 r/min; Da:339.999 mm; L:711.2 mm; Adapter sleeve assembly:SNW 3044x7.7/8; J1:114.3 mm;

Tolerance housing:H7; B:20 mm; D:22 mm; Specific static load factor K0:20 N/mm²; d:15 mm; Permissible sliding velocity v max.:5 m/s; Coefficient of friction µ min.:0.05; Mass bushing:0.026 kg; Specific dynamic load factor K:10 N/mm²; Coefficient of friction µ max.:0.1;

Tolerance housing:H7; B:20 mm; D:22 mm; Specific static load factor K0:20 N/mm²; d:15 mm; Permissible sliding velocity v max.:5 m/s; Coefficient of friction µ min.:0.05; Mass bushing:0.026 kg; Specific dynamic load factor K:10 N/mm²; Coefficient of friction µ max.:0.1;

Bearing designation:16005  ; Grease:14 000 min-1; rs:0.3 mm; Static (Cor):4.550 kN; Dynamic (Cr):6.950 kN; ra:0.3 max; d:25 mm; da:27 min; Pu:0.207 kN; Oil:17 000 min-1;

Bearing designation:16005  ; Grease:14 000 min-1; rs:0.3 mm; Static (Cor):4.550 kN; Dynamic (Cr):6.950 kN; ra:0.3 max; d:25 mm; da:27 min; Pu:0.207 kN; Oil:17 000 min-1;

s:4 mm; d2:240 mm; d2 (max):mm; b:mm; rs (min):5 mm; Static (Coa):1280 kN; B:72 mm; b1:mm; r1s (min):5 mm; F:295 mm;

d:180.000 mm; Fillet Radius rb:1.00 mm; D:380.0000 mm; Grease Speed Rating n1:950 rpm; Fillet Radius ra:3.00 mm; Basic Dynamic Radial Load Rating C:650000 N; Basic Static Radial Load Rating Co:1100000 N; Oil Speed Rating n2:1400 rpm; B:150.00 mm;

s:4 mm; d2:240 mm; d2 (max):mm; b:mm; rs (min):5 mm; Static (Coa):1280 kN; B:72 mm; b1:mm; r1s (min):5 mm; F:295 mm;